Below is the tuning for No Limits 2. This tuning utilized the telemetry data from Collosus, Valhall, Wilderness Park, Fenrir, Forest Wilderness Park, Rock-It Man, and Venom to create a more immersive experience through emulated g-forces. By normalizing the telemetry data and removing irrelevant data, the experience on the roller coasters will be incredibly fun and not break immersion through harsh or sudden movements. Important Shaker Tuning: No Limits 2 will utilize data for shakers/transducers. This is mainly felt when the coaster is on the chain system traveling up towards the top of a drop. Its recommended to also tune your your shaker tunings down to assist in immersion as the default settings will be extreme. A shaker tuning is available at the bottom. Special Note for YawVR Users: Since Yaw is directly related to the direction the vehicle is pointed, it can be enabled on YawVR platforms. It will need to be tuned appropriately and the initial suggested values could be utilized: Yaw Effects Slider at 15 and Max Telemetry at 180. This has not been tested or verified, but a good starting point.
SPECIAL NOTE FOR H6/P6 USERS: It is recommended to enable Enhanced G-Forces at the bottom of the Motion Tuning page for No Limits 2 since it has long periods of Sway and Surge. It will provide a sustained feeling for Surge or Sway by converting the Surge effect into Pitch and the Sway effect into Roll. If you turn Enhanced G-Forces OFF, you will feel the Sway and Surge effects available for those platforms; however, the effect only lasts during the range of motion since it's parallel to the ground. This option only appears for these 6-axis platforms.
Note: To set a general tuning for No Limits 2 game, launch SRS, select TUNING, and click on the magnifying glass icon in the Profile In Use section in the upper right. Select the game to tune, and adjust the sliders and max telemetry as needed. Click SAVE when finished. For more information on tuning details, see the SRS 2.0 Motion Tuning Guide here: https://www.simracingstudio.com/forum/motion-profiles/srs-2-0-motion-tuning-guide
No Limits 2 Tuning
Notes: Normalized Max Telemetry across all effects. Prioritized Pitch, Roll, Sway, and Heave to accentuate roller coaster movement. Removed Yaw and Traction Loss telemetry from tuning to ensure no impact to other effects.
No Limits 2 Shaker Tuning
Tune On: SimRacingStudio Elite Shaker Kit Notes: Reduce all settings down to 2 to increase immersion.