top of page
SRS License for Bass Shaker and PT-ACTUATOR Motion Platform
*** Free when purchased in conjuction with SRS Shaking hardware. ***
 
*** Hexapods not supported ***
 
Feel the Gforces from car, planes and other vehicles.
 
SRS supports PT-ACTUATOR motion platforms with the following effects:
 
  1. Pitch
  2. Roll
  3. Yaw
  4. Sway (Lateral G)
  5. Surge (Longitudinal G)
  6. Heave (Vertical G)
  7. Traction Loss
  8. ABS (Cars)
  9. Wheel lock
  10. Rumble strips
  11. Engine Haptics
  12. Afterburner (Flight)
  13. Landing Gear (Flight)
  14. Canopy open / close (Flight)
  15. Cannon Firing (Flight)
  16. Missile Firing (Flight)
 
Exclusive Intellitune feature that uses artificial intelligenge to find a balanced tune based on your driving style combined with the community tunes.
 
Easy to setup, easy to tune, just plug and race/fly
 
SRS bass shaking software already optimized your immersion for the following telemetries.
 
  1. Engine rumble
  2. Gear change (Cars)
  3. Road Texture / Heave
  4. Suspension movement (Independent 4-way - Cars)
  5. Impact
  6. Acceleration / Surge
  7. Deceleration / Surge
  8. G Forces (Sway)
  9. Traction Loss (Cars)
  10. ABS (Cars)
  11. Afterburner (Flight)
  12. Landing Gear (Flight)
  13. Canopy open / close (Flight)
  14. Cannon Firing (Flight)
  15. Missile Firing (Flight)
 

SRS License for Bass Shaker and PT-ACTUATOR Motion Platform

$59.99Price

  • Can your software be used to drive a BUTTKICKER?

    Yes. Our software can be used to enhance buttkicker experience. Instead of using game sound that has lot of noise and interference, our software will send to buttkicker only telemetry information converted to optimal low frequency sounds

    Instructions can be found here
     

    Do I need extra hardware to use your software with BUTTKICKER?

    May be. In order to send SRS telemetry sounds to the BUTTKICKER amplifier, you need to have a DEDICATED sound card to split game sound from SRS sounds. If you already have a built-in or external sound card not been used, you can connect the buttkicker to it. If not, you can acquire any internal or external sound card from online stores. We reccomend a 5.1 sound card as it can be expanded into a full multi-dimensional system in the future (additional hardware required).

     

    What is the difference between using a BUTTKICKER as is or using your software to drive it?

    BUTTKICKERS uses the sounds sent by the game and convert them to low frequency in order to create shake effects.

    Our software is a lot more precise as it uses your own vehicle telemetry inputs and generate specific low frequency sound waves to the BUTTKICKER. It makes the effects multidimensional (if you have 2 or more buttkickers or shakers). It also capture effects that the game does not send as sound such as gear change and braking and convert those to sound waves.

    For example, you can feel (with our software) a nice bump when you change gears. Gear changing, does not make sound, so it's not captured in a standard BUTTKICKER system. Adding our software will provide that effect.

    If you have installed 4 buttkickers in your rig, you can also enjoy multidimensional effects. For example, when you go into a rumble strip on the right side, our software will only send sound waves to the right buttkickers and so on. It gives you a much better multi-dimensional shaking. In a standard BUTTKICKER implementation, it sends the same signal to all shakers.

Related Products

bottom of page